I Frames feature a unitized grip/solenoid housing, funky styling, fully polished bodies, a FULLY adjustable double trigger with no side to side play, and better marker balance due to the grip being moved forward a full inch. Note that the grip only has moved, not the solenoid housing, so all your vertical reg or fore grip mounts will work just fine. They weigh a little less than the two separate stock parts do together plus they are 1/2 an inch shorter overall making your Imp not only shorter front to back, but shorter top to bottom! The rounded grip frame is very comfy in your hand. Installing them is even easier than installing the stock frame due to the one piece construction. They work with Semi, Turbo, Vision, and Genesis boards. I Frames are available in polished Black anodizing or bright Nickel plating. They do lack the Revolution Mod (inteli-feed) slot however. If you currently use the plug in connector, please make arrangements with us to modify your I Frame! Included in the price is the I Frame, trigger, and instructions. They do not come with rubber grips.

Genesis AT Boards: An upgrade for the Impulse, that provides advanced control of the timing, and fire modes. Like the Glacier AT for Shockers, the Genesis AT is a drop in, select fire board, offering the same classic firing modes through it's programmable trigger, (turbo, auto-response, full auto,programmable bursts, and a sniper mode).

The Voodoo Full Flow Vertical modification allows your Impulse to run at its maximum level of performance. A factory fitted internal modification to your Impulse splits the gas supply allowing unrestricted flow to the solenoid and the valve chamber, giving greater consistency and a much smoother operation. The FFV is fully compatible with all standard thread vertical regulators and gas through grips and can be fitted to any Impulse. They come in Black or Silver. You will however have to re tap the #10-32 threaded hole deeper and sink the set screw in farther. We will supply instructions. If you feel this is beyond your abilities, H.S.W. will install the Full Flow at no charge. Shipping and Handling fees however do still apply. S&H on an Imp with no air system is $10.00. $15.00 if you send us your tank.

The Voodoo Impulse Bolt oozes class. Currently available in Black Delrin, the need to constantly lubricate your bolt is now eliminated due to the complete lack of o-rings. The lightweight construction and low friction content of the Voodoo Impulse Bolt dramatically reduces any 'kick' when you fire your gun. Comes as standard on the Voodoo Impulse.

This two-piece bolt pin adds the finishing touch to any Impulse. Available in the 5 standard colors, Blue, Silver, Green, Red and Purple. Pick a colors to suit your mood. Featured as standard on the Voodoo Impulse.

The hard-lined Spear Voodoo Spring Cap comes in two colors, silver and black. The Spear cap utilises the existing valve spring. Choose one for your Impulse today.

Smart Wrench: Here's a necessary part of any Impulse owners tool box. It even has a big fat flat with which you can unscrew your piston housing without marring it!

Dow Corning #33 Grease: Smart Parts recommended lube for your Impulse. Enough to last a life time! (Life Time is dependent on age, condition, genetics, and personal habits. No Life time guarantees unless you are a fruit fly.)

These kits are made up of one foot of 1/4" mid pressure hose and two 1/4" push to connect fittings. The mid pressure hose can handle up to 1000 psi safely and can be used for CO2 or HPA regulated down to 1000 psi. Two styles of fittings are available, straights or elbows. The elbows are non swiveling. The hose itself comes in black only.

Smart Parts Drop Forward Cradle: Drops the bottle straight down and moves it forward.

O.T.P. Max Flow Tourney Ring: Built to keep you from turning your regulator pressure UP during a game. A regulator cap is required at most tournaments.

4500psi Max Flow System for Low Pressure output (Shocker/Impulse) with manifold, tank and fill nipple

Also available are 4500 psi systems for high pressure output (Cockers an Mags and stuff)

RASE Tank Covers: A neoprene cover for your tank. They come in Blue, Red, Yellow, Green, and of course Black.

Freak Barrels and Sets- Simply the best barrel out there for the money. 8 barrels in one package! By changing the 6 inch long barrel insert you change the bore size of your barrel. They come with 8 inserts and a Tear Drop front end. The Set also includes a hard carry case to protect the parts from damage. You can opt for a colored front or a stainless back.

Available in 12", 14", 16" versions. Small, Medium, Large bore sizes. Splash colors are Smart Parts splash colors.

Questions? Comments? Lonely? Email John at

To contact the web site master send e-mail to